August 8, 2021 – Two flights and some nice weather.

The other day there was a call to action on the Wings of Carolina slack. “Is anyone able to help this pilot get one of our planes back?” Seems this newly licensed pilot, (Congrats!) passed his check ride on Friday and the weather was not great so had to leave N69012 at Asheboro. I said I would be glad to help out if the IFR weather cleared by 9am, I could give him a ride over in N8080A.

I booked a 9am-12pm block, and got to the airport at 8:55am. Grabbed the 80A book book and went to the lounge to check weather. Luckily the fog had burned off and the skies were clear! The pilot met me in the lounge, I wrapped up the weather briefing (nothing of note) and we went out to preflight. The left red nav light was out, but that’s only required at night, confirmed by asking the other pilot. The fuel truck came and filled us up to the tabs (34 gallons) and we were off.

My flight plans were from KTTA -> KHBI (drop off pilot) -> KEXX then back to KTTA. Just under a 2 hour round trip, which took a bit longer because when we got to the hold short line for RWY03, I realized my iPad wasn’t connected to the GPS, so we fiddled with it for a few (no one was behind us, but oof Hobbs running) and couldn’t get it working. That’s fine, we had our GPS and the pilot knew what KHBI looked like form the air. We took off, departed the pattern to the north, got to a little bit higher then turned west.

The pilot was super helpful, having a copilot be able to put in the radios for Siler City as we passed, and the AWOS/CTAFs in for KHBI was actually a really big load off my plate. It’s the little things! Flew at about 3000ft over to KHBI because It was only a 20 minute flight so I stayed low. We get to the airport and he lets me know that RWY24 has a papi, so we chose that runway to land on. Land pretty okay, didn’t grease it, but it is what it is. Taxi over and get him to his plane. I shut down so he can get out safely, then realize after he got out, I CAN’T OPEN THE DOOR. I had to yell him over to make sure I could open the door again, the bottom latch was stuck! I recorded a video, then instagrammed a fellow pilot who is famous in his circles for getting stuck in his plane and having to call someone down in the area who landed and helped him out. Told him he’s not alone, hah.

Anyway, I was able to open the door so I felt like it was okay if I crashed and had to open the door myself. I turn the plane back on, plug in my Stratux for ADSB on iPad, and get ready to take off. I taxi over to the runway (took 24 again out) and hold short for a taildragger and another plane to land. I then take off and woahh there were like 80 birds at the end of the runway at like 300ft up. Luckily I was able to scare them and flew above them, then departed to the right (west) and headed to KEXX. Luckily thr CTAF is the same for both (122.8) so I was able to hear the traffic without fiddling with the radio. I set the AWOS beforehand, so I checked that when I was close, and still winds calm, not bad.

Got 10 miles, out, announced position, 5 miles out, announced I was entering the downwind at a 45. I was on the down when a pilot to my right asked if I was on base, kind of weirded out because I wasn’t so I was vigilant and said I was on downwind (again…). Then called base, and final and landed. Final was neat at Davidson county, had to fly over a factory, which was kind of cool.

Landed, taxied back to the runway and lined up and waited again. The taildragger had followed me! Saw him land as I was at the hold short line. Waited for a jet to land and then off I went! I climbed out, departed to the east, and climbed up to 5500msl. Held 5500 very well this trip, the air was super calm and I’m getting better at electric trim, much easier than just wheel trim.

At one point I turn the auto pilot on, with it set to 109° and 5500msl, but for some reason it made me descend and banked me left 45° and I wasn’t liking that so I disengaged it. I climbed up back to 5500′ for the rest of my trip. By the time I was back to KTTA, the winds still favored RWY03, so I joined the pattern on a 45° entry, and landed smoothly. At around 3000msl descending near Ashbury it was a bit bumpy, but that’s the only turbulence I experienced. Such a nice morning.

Well I get back to the airport and land and shut down… I’m stuck again! Door won’t open. There was no one around I could yell to, so I called the front desk, no answer. I tried again, using different pressures and trying to see if there was like a little latch that didn’t hook. I fiddled for a few minutes and was able to get out, I guess I got it just right.

I then cover the plane, and squawk the door not opening, and posted the video on slack. The next pilot replied to my slack post later that evening that he had no problems. Maybe I’m just door cursed.

Lauren and I then went to lunch before my next flight where I was taking her up in a Cessna 152 (N89333). Well we do the preflight dance, go taxi and take off. At like 300′ above the runway, the damn pilot side door opens up! It’s fine but I don’t want to worry my wife, on her second flight with me ever, so I have her hold the door closed while I go finish the pattern loop (I was doing that anyway). Well MORE fun happened the pilots PTT(push to talk) button got stuck off, so I had to use her microphone to talk, (I could have just switched the plugs, but we were in the base turn). I kind of overshot base so had to over correct a little bit, but we landed okay, taxied back and agreed we were discontinuing our flight. We could have gone back up and carried on – we had the allotted time – but you know what? The rest of the flight wasn’t in the cards.

Total distance: 112.65 mi
Max elevation: 5883 ft
Min elevation: 205 ft

Total distance: 13.51 mi
Max elevation: 1165 ft
Min elevation: 195 ft

August 1, 2021 – Cessna 152 Checkout

Today I got checked out in a Cessna 152. It was really my first time (besides spin training) flying high wing planes and I was a little nervous. We had a pretty standard pre-flight check, took a lot longer than just a “I’m out here to go on a flight”, again because Luke was explaining things to me. There’s a lot of differences like with the warrior, all the flaps are on hinges, but in the Cessna, there’s one pulley hinge and some rollers you need to check, not just actuation hinges. Pointed out how the landing gear is different, there’s plastic fairings that we need to repair quite frequently, and there are no dampeners.

After the pre-flight we took off, Vr is pretty low, at 50 so the plane just wanted to float almost immediately in my opinion. It was also a cooler day outside than my most recent few flights, so that helped too. We took off, headed north to the practice area. I get up to 3000′ msl and we level off, trim for cruise flight and lean the engine. This plane also has a vernier mixture control, so it’s nice to be able to dial in the mixture, even if there’s no on screen display of the gallons per hour like the M20J. There were some clouds at 4000′ I think, but they were tiny, and we figured we didn’t need to go above them, so we stuck at the 3000′ level.

This is where Luke says to just take the plane and do tiny things with it, like turn it uncoordinated, see how much rudder I’d need to do a turn. So I did that for a bit, did a standard rate turn to the left, and we switched to some 30° turns, leveled off then did two 45° turns, back to back. I hit my prop wash at the end of the second one, that always feels great. The first few turns were gross, this plane has old cables for the ailerons, so there’s a lot of play when turning, so it took a few tries to be able to maintain altitude and find that comfortable dead spot with cable tension. The last plane (M20J) I flew, everything was much stiffer for turning.

After the few turns, he said “oh no, there goes your engine” and throttled to idle. I looked around for a place to land, and didn’t see one immediately. One thing I could have done better is look out the back window, because the 152 actually has one! Well I found a spot to “crash land” so I brought the plane to Vglide (60) and slowly descended towards the place to land. I guess in my “everything is okay” did the A B part of the emergency checklist, but I didn’t do ABCDE, so we did it again. This time I:

  • A- pitched for best airspeed (60kts)
  • B- found the best place to land
  • C- Checklist, pretended to check fuel, master, key, primer, etc.
  • D- pretended to switch to 121.5mHz and declare an emergency
  • E- executed the landing, and prepared to exit (opened the door, turn off mixture, etc so the plane doesn’t blow up and I can get out)

and found a cute little field to land in. That was successful so we headed back towards the airport.

At the airport everything was standard traffic pattern. There were three of us in the pattern, one tail dragger that was always just behind us, really friendly guy who liked chatting on frequency, and one low wing – maybe a warrior? – I can’t remember. Well I did six landings. One normal landing, three short field (the last one I did great, landed on numbers and was done before A2 taxiway entrance) and then a few more normal.
Luke said that I was death gripping the yoke, so he did one lap around the airport – where he trimmed and only used his two fingers lightly to move the yoke. Watching him do that, I copied and did a lap around the pattern the same, much easier this time.

We then landed, taxied back and went to park. Parking is WILD, you sit on the tail and then back then walk backwards to get the plane in place. I guess when your plane’s max ramp weight is 1675lbs, that’s easy to do! Three times as much as my motorcycle… After we chatted, he said he feels safe with me flying it, and I agreed. “I feel safe, but not super comfortable, but that only comes with time so I feel safe to take it up and get more comfortable”.

I then had to fill out the quiz, and scanned it, then emailed it to him.

Total distance: 126.39 mi
Max elevation: 3709 ft
Min elevation: 228 ft

July 25, 2021 – Mooney M20J checkout… sort of

Tuesday night I emailed my instructor saying “Hey the Mooney is available Sunday afternoon, could we start getting me ready for a checkout”, and he said “sure, book it”, so I did. Then last night I started reading through the POH. There’s a lot of neat differences. Cowl flaps, retractable landing gear, constant speed prop. I definitely wanted to start getting my complex rating. I read through that POH, and look up a lot of videos on how to work the prop. I’m used to just throttle and mixture in the Warriors, but this has throttle, manifold pressure, and mixture levers. I learned the cool parts about how the oil pressure, and springs set the propeller angle.

So I get to the airport at about 1pm, and we start talking about what I know. I explained how the undercarriage stuff works, under 132kias for lowering, and under 107kias for raising, and learned from Luke that there’s two different speeds because of gravity and fighting gravity. We spend the first hour talking about why you need different manifold pressures. Then we head out to the plane and do a very comprehensive pre–check. I learned that the M20J doesn’t have a trim tab, the whole tail raises and lowers on a pivot, NEAT! The flaps are suuuper wide and the ailerons are kind of thin. The landing gear was an interesting inspection because of how the poles and hinges open/close the gear.

After the pre-flight we get flying. Things are pretty similar on the ground, as the propeller lever is pushed all the way forward, and the throttle is the main control. Luke points out that the propeller is rounded, so there’s an RPM range that you shouldn’t idle in, (1550-1950ish), vs the squarer prop that the other Mooney had.

We take off, and one thing I check different is if I have available runway left, and when I don’t, I can raise the landing gear at that point. It was pretty cloudy, so we had to climb up to 5500′, and eventually we hit 7000′ to jump over some clouds. First time really being above clouds this much, for the first hour we were over them. For the climb out he told me to set the plane to “twenty-five squared” – 2500rpm and 25in/hg. And every so often I would need to add more manifold pressure because of the atmosphere lapse rate while climbing.

We got up to 6000′ ish, initially and then did some straight and level flying, super smooth above the clouds today. Then we did some 30 degree turns, did a few of those okay. When we did 45 degree turns, my first left one was kind of bad – lost a lot of altitude. One to the right was okay, and then the third one to the left I kept my altitude right.

After turns we did slow flight, and it’s pretty much the same controls. The power off stalls I was I guess putting in unconscious left aileron, because we kept starting to spin a little to the left, next time I fly I definitely need to practice that more.

Well we ended up going pretty far east, at one point we were like 15 miles southeast of RDU, felt uncomfortable not talking to anyone there, but I guess it was out of the normal flight path for the jets so we were fine.We ended up needing to head back to the airport for 4pm, so I put the plane in a 750fpm descent while heading back, at one point I was able to punch through the clouds at around 2500′, and we joined the traffic pattern on the 45 for downwind on 21. I landed VERY well he said. He said that people transitioning from Warriors to Mooneys land hard because the M20J is a lot lower of a plane than the PA28, so they flare early and land hard. I didn’t flare early both times we landed so he said we could just end for the day. I always love when instructors say I do well with landings!

We then get back to the airport to do some payments and find out “Oh, Tyrel needs 250 hours without an instrument rating, to fly the M20J, or 150 with an instrument rating.” So Oops, I guess it’ll be a while before I can rent this, and get an actual check out.

Total distance: 169.41 mi
Max elevation: 7036 ft
Min elevation: 227 ft

July 10, 2021 – First flight with Dad

[Writing this July 26th, I’ve been busy traveling and with visitors]

I actually did a flight on July 7th, but It was only one lap around the pattern. It was 95°F here, and I knew I wouldn’t be in the right mind to continue my flight as I got to the traffic pattern after take off, so I just called crosswind, and headed back to land, a whopping 0.3 hour flight time! So that’s what just one melting traffic pattern loop looks like!

Anyway! My father was excited to fly with me, we took N2114F up. We intended to go from KTTA-SDZ-KRCZ, but it was still hot, so we decided to just do SDZ and back.

We take off, and do one lap around the pattern – I want this to be my standard when I bring new people up, it gives them a way out to say “GET ME OFF PLEASE”. After that one pattern lap we headed towards SDZ. It was a really smooth flight, we flew at 4500 feet to the VOR, then tried to get to 7500 feet on the way back (We had time, I wanted to climb) but it was just SO HOT that we ended up just staying at 5500feet, the climb was taking forever!

When we were 10mi from the airport, it started getting super busy (BBQ day at the airport!), so we decided to waste some time in the practice area and I did a steep turn for him to waste more time. After that the traffic died down so we headed back to KTTA. I did a touch and go, a regular landing, and then being that there was no other traffic, practiced an emergency engine out procedure (what I failed on my checkride) and that went smoothly.

So nothing super special about this trip, besides it was my first time flying my father.

Total distance: 132.84 mi
Max elevation: 6960 ft
Min elevation: 200 ft

June 14, 2021 – First flight with Lauren

Today was my first flight with my wife, Lauren. She is my first real passenger (“technically your DPE is, blah blah”). I didn’t know what to expect, I knew she had been up in planes before – she’s gone skydiving, something I will probably never do. I’d rather be the person to fly the “JUMPERS AWAY OVER X” than be a jumper. I don’t want to make this entire blog about Lauren, although we all know I could. So I will try to keep it 50% airplane talk!

We scheduled a 12pm flight, with an estimate of me probably taking off at 12:30 (took off at 12:40 for pattern and 12:49 to KDAN), Cross country from KTTA to KDAN and back to KTTA. I wanted to fly at 4500’msl there, and 5500’msl back, following the East is Odd +500 and West is Even +500, because it was a 358°ish flight there and a 178°ish back (that’s from airport center to airport center, but I did some cloud avoidance, a few times (like, the whole time) so I was pretty off course, but ForeFlight will get me there. I brought my Stratux because I remembered that N8116J didn’t like bluetooth and ADSB so my iPad wouldn’t connect to the plane. I also bought a new GPYes unit that I wanted to try out, and it worked great, no more magnetic GPS sticking to random magnetic things, everything is self contained in my Stratux!

Wind was good for RWY21, so I had to taxi via Taxiway Alfa to get there, still not a fan of how Wings of Carolina has us do a runup off the taxiway, something I need to get used to at a busier airport than KEEN. Well, we took off and I did a loop of the pattern – I wanted to gauge Lauren’s stomach, and my flying abilities to make sure she was okay to fly. The Pressure Density was 2,800′-2,900, which for a 255’msl runway, oooof. After the second takeoff we flew out to the traffic pattern then departed to the north! We climbed up to 3000, the cloud layer was about 3800 so I chose to stay under it, vs fly over the top and chance not having an opening. It was pretty bumpy – there’s a convective SIGMET over like the whole east coast – so I knew it was going to be a little bumpy. Lauren was taking pictures the whole time (she took 47! I’ll share some) and got some fun ones of me. In my pictures I look like I’m super concentration face, but she got a couple of me smiling.

Nearing KDAN I realized that the CTAF was Actually a CTAF (Common Traffic Advisory Frequency) and that KDAN had a tiny little tower. I called 15 to the south (because I heard a lot of traffic) and the nice person on the frequency came in and said something like 16J there’s two planes on the taxiway, one in the pattern and one just departing, which now I understand why people come on our Unicom back at KEEN and keep saying “KEEN Unicom please advise”. Well we got closer I said I was flying over midfield to make a tear drop into the downwind. I did as such, flew over at 2500′, did the tear drop, down to 1500′ and landed. We then taxied to the FBO and shut down [my outside camera picked THREE seconds after I shut down to die, perfect timing]. The nice ramp assistant gave us a ride to the FBO in the golf cart so we could pee.

Gatorade passed through our system completely we headed out to the plane. We got some weird looks from the people chilling in the FBO (Enterprise people, and like a grandfather? idk) for wearing masks. Yes we’re both vaccinated, but I sure as hell don’t know if the random people I run into are, gotta keep you safe!

We took a few pictures, and then went and started up the plane. When I was doing my run up, I didn’t have the mixture full rich, was still leaned for ground ops, so when I did the mag drop I heard a backfire, was like OH SHIT and realized I was leaned. Put in full mixture, and did the mag drops again, ~150rpm loss and we were good to go. Lesson learned here is even if there are shortcuts for when the engine is hot, and you just land for 10 minutes, probably good to go through the full checklist even just skimming it.

We took down taxiway Alfa again and got to RWY02. Side note, KEEN has 02-20 and 14-32, this airport KDAN has 02-20 and 13-31 so when I came upon it, I was like “holycrap I feel like I’m home”. Anyway – when we got to the end of the taxiway there were two entrances only like 100ft apart to the runway, it was weird. We had to wait like 10 minutes to take off, because there were 4 planes doing touch and goes and they were perfectly spaced to give me like NO time to take off. I know how long of a runway I need to be safe, but with a 2900′ Density Altitude, I know I needed a longer ground roll, so finding time to slip in to where I knew I could take off was annoying. Finally one of the guys on downwind said “Plane waiting at 02, I’m extending my downwind a little bit to give you some time to take off, so I rolled out, thanked him and took off to the north a bit. I extended my upwind and gave the pattern a large buffer, then took off to the south.

Lauren seemed to be getting tired by like 75% of the trip back so maybe next time I’ll take the plane for four hours, and then we can take a full hour between legs, instead of 15 minutes. I did three hours, because I planned for a longer break between – we even bought zucchini bread I made last night! – but I threw in that extra pattern lap before we left the airport, so that added like 15 minutes, and I couldn’t find the flight book so that took some extra time.

When we were on the way back to Raleigh Exec, we saw another plane like 500′ below us so I flew above them and circled past them then tried to come in behind them but I have no idea where they went when I flew over them, my ADSB decided to not pick them up, so I did a larger right turn so I knew I’d avoid them. It was weird and I’ll have to check FlightRadar24 playback to see – but it’s not up now for some reason. After that steep turn I entered the downwind and landed. We landed with 2 minutes to spare, but it took a few minutes to shut down, and tie down. Glad someone wasn’t right after us (if someone was I would not have gone as far of course). Covered the plane, paid the $260 for 2.3 hours of flying, put the book away and headed home.

The return trip took about exactly the same length. We left KTTA at 12:49, landed at KDAN at 1:36 (49min). Then with waiting for takeoff, we left KDAN at 2:07 and landed at 2:57(50min). On the flight back, it was a bit bumpier, the clouds were still scattered at about 3800 but some were darker than others so I flew around them. I wonder if when I finally fly IFR if I’ll fly a lot straighter, instead of just “oops avoid that cloud!” that remains to be seen.

Some attachments today are the airport charts for KTTA and KDAN, as well as a fun youtube video of the first leg to KDAN. Two GPS recordings (ADSB FINALLY!) and hopefully a small gallery of Lauren and I. (Link to all photos will be at end as well)

Total distance: 100.51 mi
Max elevation: 3125 ft
Min elevation: 200 ft

Total distance: 101.44 mi
Max elevation: 3293 ft
Min elevation: 210 ft

June 7, 2021 – Final Checkout Ride

I can finally rent planes through Wings of Carolina! Flew today and the CFI passed me.

I was a bit nervous about the North Carolina weather so I text the instructor to see if we could leave an hour early for the controlled airspace portion of the checkout. He said let’s shoot for 3:30, we took off at 4 because he gave me a bit of ground instruction on the systems in N8116J. (Also we couldn’t figure out the radio, so had to push a few buttons to get comms working. It seems when 16J was in the shop, they had undone all the COM1 COM2 selection buttons, which caught us off guard.)

We took off, then flew south to Fayetteville (KFAY), Luke showed me the auto pilot, how to climb, descend, turn to a heading, so we enabled that on the flight to KFAY. 20 miles north, called approach, I fumbled my radio A LOT. I definitely need more controlled airspace practice. ATC Talks FAST. It’s hard to fly the plane and copy things down, I think I need to start using a pen and paper, not Foreflight for ATC remarks, it’ll be much easier. I put a FieldNotes book in my flight bag the other day, time to use it! After a few more fumbles (I copied back the altimeter, not the altitude, talk about stress!) I was cleared to land. Squawked 0210 and landed on runway 22 almost straight in, I took a right handed base, it was weird! There were no commercial flights so they were at a lull of traffic which is why I just got the RWY22 CLEAR TO LAND. Unfortunately (or Fortunately..) LIVE ATC and KFAY approach are down so I have no recording of my fumbles. Would have been nice to hear them again so I could learn.

We landed, taxied back to runway 22, and then said we were taking off VFR. Squawked 0212 now and departed, stayed runway heading until they said turn right heading 320 staying at or below 2500. Then a bit later they said fly flight plan heading I turned 355 and then we finally got out of their airspace. There’s two airports there, KFAY and Simmons Army Airfield (KFBG), so their airspace looks like a cell dividing, two round circles and of course we bisected it the long way.

Out of their airspace Luke said “I have the controls”, then banked hard 60 degrees right, and pointed down. He said “If you’re ever VFR and inadvertently hit IMC weather, and get into an unusual attitude, hit this button [LVL] and presto, the wings will level.” which of course they did. Auto pilot is still wild to me, I never flew with it in N43337, so it’s going to take a lot to get used to, but I’m sure I’ll start loving it.

We then called 10mi on the 45 for RWY22, did a touch and go, (I came in a little higher than I wanted I still need to learn the sight pictures for this airport, but oof it’s FLAT still.) took off did the pattern once more and did a full stop.

On this flight, I learned the GPS a little bit more, the touch screen menu will make selecting comms so much easier, glad they have these consistently in all their planes. I also learned AutoPilot, I need to find a flight sim model with this auto pilot (I did get a Logitech/Saitek Multi Panel with AutoPilot on it this weekend, so good timing!) that I can learn how the IAS, ALT, VS, HDG buttons work better. HDG and ALT I get, those just hold heading and alt, but airspeed and vertical speed climbs are still magical!

Luke then signed me off, so I’m clear to rent any of the PA-28-161 that they have at Wings of Carolina. I told him I want to learn how to fly the Mooney M20J soon, I’m excited to get my complex endorsement.

Here’s some radio clips of me in the KTTA Pattern, just for fun.

(The profile there is wrong, but the track is right, so something was funky with FlightAware. the Bluetooth on 16J was broken so I couldn’t foreflight. Seems this is endemic in the WOC planes, so I might keep bringing my Stratux just for my logging)

Wings of Carolina Check out
100%

May 27, 2021 – Second flight as PPL

I was able to sneak in a cooler morning flight in N8080A. I took my motorcycle to the airport, but forgot my yoke mount so I was iPad-less. We had to wait for a long while to get fuel because the services truck was filling the HU-16 that had arrived a few days beforehand. There was also a C-27 taking off, super cute, Feels like a baby C-130!

We went up, took a few minutes to do another 45° bank turn. I did that a little better, less shaky. Then he had me practice some emergency descents. I didn’t do as well at those as I should. I need faster ADM skills. That will come with time, one of my big weaknesses is emergency things, so it’s one thing I’m excited to start practicing.

After the emergency procedures, he had me practice rudder control. Putting in enough rudder while turning to hold on target before the turn and rolling out while pointing at a target – but rolling out. I’m much better at rolling out than rolling in, so I’m excited to have a new procedure to practice. One of the things I like a lot about this CFI giving me the checkout to borrow planes, is that he’s young. He doesn’t have these really old ways of thinking about things and I appreciate that.

After the higher altitude stuff, he wanted to see some short-field landings. The first time in the pattern we had to extend our downwind A LOT, there were three people on long finals, so our downwind was funky and long. I’m still getting used to this plane and the runway so by the time we were about to touch down, the other plane in front of us was still on the runway (albeit turning onto taxiway A3 a mile down the runway) so he said go around, as technically the other plane was still on the runway and things could go wrong even with that far separation.

Did a go around and the next two short fields were okay. We got off at Taxiway A2 I think, and then took taxiway A back to the ramp. When we got to the intersection with A and A1 there was another plane getting ready to cross the threshold, but it was a Cessna 172… high wing! They didn’t notice that there was a taildragger apparently norad coming on a 45° final, not straight in and almost rolled into the runway. Luckily the CFI I was with shouted STOP on the CTAF and they stopped, seconds before an incursion! EEEEK!

Wrapped up, and planned our third checkout ride, it’ll be down to KFAY, a controlled field. Should be on June 2nd and then I’ll be cleared to rent the planes and feel like a full member of the Wings of Carolina!

Unfortunately no GPX file, but I have a screenshot.

Screenshot of flight path.

Wings of Carolina Check out​
Wings of Carolina Check out 66%

May 26, 2021 – First flight as a PPL

On April 26th, I took my first flight as a Private Pilot. I was flying with a CFI for a checkout to rent planes from the Wings of Carolina club, so the flight was nothing really to talk much about. It was really hot, and my first flight in almost 5 months, so I was definitely rusty.

Mostly using this flight as a stepping stone to try out the GPX viewer. I flew a PA28-161 – Warrior II – N8080A for One hour. Flew from KTTA, up north west a bit, did a few steep turns, then back to KTTA.

Total distance: 67.36 mi
Max elevation: 3386 ft
Min elevation: 229 ft
Wings of Carolina Check out
33%